Information for home owners, businesses and volunteers who are involved with a clean-up and recovery of buildings damaged by floods, storms and other natural disasters.

Fire

During a fire, asbestos containing building materials will typically crack or spall. Spalling occurs when flakes of the material ‘pop’ off due to the build-up of pressure inside the material. This happens when water turns to steam.

Asbestos fibres released during a fire are mainly released through spalling. Fires involving asbestos containing materials can produce a range of asbestos debris, including unburnt and partly burnt pieces. Some asbestos containing materials can be severely damaged during the fire.

Minor disturbances, such as walking on the site or wind blowing over the site, are unlikely to generate significant quantities of airborne asbestos. More significant disturbances, such as during clean-up or demolition of the fire-damaged building must be done safely to ensure the level of asbestos fibres in the air is kept very low.

To minimise disturbance of the debris, the following precautions can be implemented:

Persons should be warned and prevented from walking on or through the fire debris thereby minimising release of asbestos fibres from the debris. This can be achieved as follows.

Putting up warning signs cautioning people from entering the boundaries of the property containing the fire damaged building. An existing fence around the boundary of the property may be used to affix the required signage and aid in preventing persons from entering the debris area. If signage is not sufficient to keep people out of the debris zone consideration should be given to erecting a fence.

Cleaning up after floods and storms

Employers and workers involved in the flood and storm recovery efforts must still remember their obligations under Queensland’s health and safety laws.

These laws are in place to protect Queenslanders. By being vigilant and maintaining safety during this difficult time, you can help reduce the risk of death, injury and illness to yourself, your workers and others involved in the clean-up and repair effort.

Request a free Asbestos Removal Quote today and one of our experts will be in touch.

  • This field is for validation purposes and should be left unchanged.
Our Services

These are our key service areas

Bonded Asbestos Removals

Friable Asbestos Removals

Additional Services

Bonded Asbestos Removals

What is Bonded Asbestos?

Bonded (Class B) asbestos is less immediately dangerous than Class A and is part of a fibre-cement product. The asbestos is in bonded sheets where it’s deeply embedded in a hardened matrix. The sheets may be flat, corrugated or tubular.

As per the Workplace Health and Safety Regulation 2011, an independent competent person is needed to undertake a clearance inspection and issue a clearance certificate following any Class 'B' asbestos removal jobs.

Friable Asbestos Removals

What is Friable Asbestos?

Friable ACM is any material that contains more than one percent asbestos by weight or area, depending on whether it is a bulk or sheet material and can be crumbled, pulverized, or reduced to powder by the pressure of an ordinary human hand.

Additional Services

Deconstruction / Reconstruction

Asbestos Removals Australia understands the pressures that come from taking on a renovation project. We aim to make this process as easy and stress free as possible for all clients by offering a list of contractors with many years experience in the building industry. To help put your mind at ease we can organise an onsite consultation with any number of trades before work commences on your project.

These cover:

- Builders
- Electricians
- Plumbers & Gas
- Flooring Specialists
- Roofers
- Excavation

Talk to our expert, James Moore today 0438 185 210